4To seal the ground induction loop wire trough of the vehicle underside scanner: Pour cement slurry into the wire trough of the ground induction loop, and use a trowel to level the wire trough with the ground.5To level the ground for the vehicle bottom scanner: To ensure the load-bearing capacity of the steel trough, the bottom of the foundation pit needs to be backfilled with concrete before placing the steel trough, and the bottom should be made into a horizontal plane. The horizontal thickness is the distance from the road surface36cmEnsure that the steel trough is installed above the road surface after completion1-2cm,After leveling the ground, directly place the steel trough into the foundation pit, which needs to be at the bottom of the steel trough...... [ Details ]Feb 16,2022

1Opening the foundation pit: The steel trough equipment of the vehicle bottom scanner is an outdoor underground device. The required foundation pit should be larger in volume than the steel trough. The size of the foundation pit is: length160cmwide70cmhigh50cm. The location of the foundation pit: The centerline of the scanning equipment should be aligned with the central axis of the channel. Therefore, the foundation pit to be opened should be on the central axis of the channel. Take prison installation as an example: Prisons are divided intoA,BDoorAThe door is the outer gate of the prison.BThe door is the one on the side of the prison area. If a one-way device is installed, it is closerBThe door3-4m"Position"...... [ Details ]Feb 15,2022

1Fixed vehicle underbody scanner size standard: length112cmwide37cmhigh38cmThe outer diameter of the pipe is threaded iron pipe50mm. Steel channel material: Strong compressive resistance, standard load-bearing capacity is30Tons.①The vehicle underbody scanner is equipped with a camera inside. It scans the underbody of the vehicle and converts it into a signal, which is then transmitted to the main unit through a signal line.②Vehicle underbody scanner protective cover, made of stainless steel.③The auxiliary surface light source of the vehicle underbody scanner improves the scanning accuracy and image quality.④Light source protection cover for the auxiliary surface of the vehicle underbody scanner...... [ Details ]Feb 15,2022

The installation and connection of the vehicle underbody security inspection system have been completed and it has entered the debugging stage, mainly including the debugging of equipment such as chassis imaging cameras, license plate capture cameras, and barrier gates. Debug the license plate capture camera. Adjust the lens aperture and focal length according to the distance and height of the entering vehicles to ensure clear capture of all entering vehicles. The debugging of license plate capture cameras mainly considers three aspects: First, adjust the focal length of the camera lens; Second, the entire license plate image remains horizontal in the frame. Iii. Guarantee...... [ Details ]Feb 14,2022

Project Design: Design based on the on-site conditions, clearly define the specific installation locations of the vehicle underbody scanning imaging equipment, equipment control box, vehicle detector, vehicle snapshot camera, vehicle underbody security inspection system host, display, and each pipeline equipment, as well as the direction of the connecting cables. First, determine the burial location of the vehicle underbody scanning imaging equipment based on the on-site conditions. Generally, the following factors are considered:1Based on the width of the channel, calculate the centerline of the channel and conduct a safety inspection of the scanning imaging equipment under the vehicle...... [ Details ]Feb 14,2022

What parts are needed for a vehicle underbody security inspection system? According to the data from Shandong Seenboom:1.The entrances and exits of parking lots in government departments such as airports, prisons and customs, as well as large public places, are used to check whether there are any prohibited items in the vehicles entering and leaving2.Security checks are conducted on vehicles at the entrances and exits of large-scale events and exhibitions3.The underbody safety inspection scanning system for military vehicles is mainly applied at crossings to detect the underbodies of various vehicles. It is used for security checks, explosion-proofing and safety inspections. This system can do so quickly and accurately...... [ Details ]Feb 13,2022

Before the contract is signed, Shandong Seenboom will dispatch technicians to conduct a detailed on-site survey, draw up a detailed equipment layout plan and system construction plan, and communicate fully with the client. After the plan is approved, the preparatory work before the start of the project can be completed. After filling out the application for commencement and obtaining approval from the relevant departments of Party A, immediately enter the site for pipeline construction. After the pipeline construction is completed, equipment installation, commissioning, etc. will be carried out. First, Party A should complete the water and electricity supply before the equipment is delivered to the site.AC220VConstruction conditions;...... [ Details ]Feb 13,2022

People who enter and exit detention centers, prisons and other areas all know that it is not easy for outsiders to get in, and it is even more difficult for them to get out. Each time one enters or exits the security check verification, a strict procedure must be followed, and multiple passes are required during this periodABDoor. Vehicles entering and leaving also need to be inspected through the undercarriage security check system. The detention center in Jinan is surrounded by high walls. Its office area is separated from the prison area. To enter the prison area, one must first pass through the police office area. Even so, it is not easy to enter the office area first. Every time...... [ Details ]Feb 12,2022

1.Security inspection machine-X-ray eye security checkxOptical machinexRays are a type of electromagnetic wave with strong penetrating power, usually with small single energy5030Security check function penetration12mmThe above-mentioned steel plates. During security checksxObjects of the same density and composition but different densities and compositions can be tastedxRadiographic response imaging enables security personnel to identify objects simply by staring at the screen on the other side of the operation console.2.Metal detector doors, handheld metal detectors. Metal detector doors can alarm passing metal objects because both sides of the door panels are equipped with them...... [ Details ]Feb 12,2022

The vehicle underbody security inspection system usually employs different lenses. Line array lenses and area array lenses have different uses and characteristics in the vehicle underbody security inspection system. The following article will introduce the features and advantages of the line array camera in the vehicle underbody security inspection system. The image acquisition scheme of the linear array camera has the following advantages: In addition, the cost of the scanning mechanism and position feedback link of the linear array camera is still much lower than that of the area array camera with the same area and resolution. The coordinates of the scanning lines are provided by the grating, thus forming a linear array...... [ Details ]Feb 11,2022