The fully automatic hydraulic integrated lifting column is easy to use and simple to operate. However, as a mechanical intelligent device, various minor problems may occur during its use. For these malfunctions, we should promptly identify and properly handle them in order to enhance the utilization efficiency of the lifting column and prevent traffic congestion!

After purchasing mechanical products, there is a certain warranty period. However, if one can independently judge and correctly solve some minor problems, not only can they be used in a timely manner, but also a considerable amount of money can be saved. So, what are the common faults and solutions for unstable operation of the lifting column?

1. The remote control is not working

　　There are usually two situations where the remote control doesn't work:1. The battery of the remote control is out of power and needs to be replaced.2.If the remote control drops or the antenna is loose, you need to call the repair hotline for a solution.

Two. The bollard slides down

There are generally three solutions:

　　First, determine whether it is continuous2No lifting or lowering operation was carried out above the sky? Is it normal after the lifting operation? This reminds us that we need to perform a lifting operation once a day. Second, consider whether the remote control has been operated incorrectly. For this, it is necessary to check the remote control and operate it correctly. Finally, if the lifting column still descends during normal operation, it is necessary to call the maintenance hotline in time.

Three. The lifting column does not rise or is not in place

There are several reasons for this situation: debris around the column getting stuck in the lifting column, improper remote control operation, tripping of the electrical control box, etc.

Solution: Clear out the clutter, check the remote control, turn it off and try again

If the above three reasons are ruled out and the problem still cannot be solved according to the "Product Manual", the user should call the maintenance hotline in time.

4. The bollard does not descend or does not descend fully

The reason why the lifting column does not descend is not much different from the reason why it does not rise. This is related to the debris around the column and the misuse of the remote control. In addition, it is necessary to check whether the spare battery is charged and charge it in time. If the problem still cannot be solved according to the product manual, the user needs to call the maintenance hotline in time.

Summary

　　However, during use, attention should still be paid to the daily maintenance of the lifting column to increase its working life. After all, daily maintenance is the guarantee for the long-term operation of the product!Especially in the current icy and snowy weather,Lifting columnThe interior may freeze. The lifting operation can be carried out after thawing with hot water.Shandong Seenboom Intelligent BollardIt can adapt to the vast majority of weather conditions and has always been committed to realizing the company's enterprise value with high-quality products and services. It is your choice to purchaseLifting column productThe best choice