Vehicles are often used as weapons ranging from simple crimes to terrorist acts. Therefore, strengthening vehicle inspections at checkpoints or related places is not a new thing, but a major event marked by the continuous upgrading and innovation of inspection technologies over the years. Before this, one way to conduct vehicle underbody inspection was to use the underbody inspection mirror to check for fugitives, smuggled contraband and explosives. During the inspection, a convex mirror is installed at the end of the long pole. The security personnel walk around the vehicle and pass the mirror under it. but......
Vehicles are often used as weapons ranging from simple crimes to terrorist acts. Therefore, strengthening vehicle inspections at checkpoints or related places is not a new thing, but a major event marked by the continuous upgrading and innovation of inspection technologies over the years. Before this, one way to conduct vehicle underbody inspection was to use the underbody inspection mirror to check for fugitives, smuggled contraband and explosives. During the inspection, a convex mirror is installed at the end of the long pole. The security personnel walk around the vehicle and pass the mirror under it. However, this inspection method has certain limitations as it can only provide a partial view of the underside of the vehicle, and the security personnel conducting the inspection also have a potential risk of damage. After that, there was also a digital vehicle underbody scanner with a liquid crystal electronic screen, which could switch images left and right or electronically zoom in, and was equipped with an infrared sensor, allowing it to be used normally at night. However, this method also has certain limitations. It not only puts security inspectors at risk but also has considerable limitations in manual inspection.
In response to the above-mentioned issuesSeenboomShandong Security Technology Co., Ltd. has developed a new type of vehicle underbody inspection robot, which features easy deployment, simple operation, intelligent mobility, clear imaging and convenient transfer. It can be put into use at the checkpoint without any civil engineering or construction cooperation.
This oneIntelligent vehicle underbody inspection robotIt is a small and flat vehicle underbody inspection robot, mainly used for active inspection of vehicle chassis. It can also be used for inspection of narrow and low Spaces such as large containers, shelves, the bottom of containers, and the bottom of tables and chairs in conference venues. It can also enter areas where traditional equipment is difficult to access in the presence of dangerous and radioactive substances.
Product features
01 Robot-driven, it has the ability to perform translational motion in any direction and Angle, is flexible in movement and easy to operate.
02 There are three video systems: a high-definition wide-angle camera located above the robot, a pitch camera in front of the robot, and a high-definition night vision camera behind the robot(High definition, capable of night vision).
03 Images can be stored for later viewing.
04 Various sensor modules can be loaded to detect the target area.
05 The robot has a high traveling speed and high working efficiency, and is particularly suitable for rapid inspection in large areas and low Spaces.
06 The robot has a large battery capacity and can work continuously2More than an hour.
07 Protection gradeIP65.